Modules in CYPE programs
- CYPE
- Solutions for professionals
- Modules in CYPE programs
Program
Categories
- CYPECAD
The RMP module is compatible with CYPECAD and allows the program to analyse and design ramp slabs as isolated elements of the structure.
- AcouBAT by CYPE
This module can use the AcouBAT by CYPE program, a tool developed by CYPE and the French organisation CSTB (Centre Scientifique et Technique du Bâtiment) to study the acoustic insulation and conditioning of any type of building
- CYPESOUND
This module is used to carry out acoustic insulation checks according to the calculation method described in the EN 12354 (ISO 15712) standards in CYPESOUND.
- CYPELEC
This module can be used to define special grounding systems in electrical systems in CYPELEC.
- CYPE 3D, CYPECAD
In CYPECAD, the ZCA module is used to design foundations with special element intersections, establish polygonal limits of footings, and apply loads on footings, pile caps and strap and tie beams. In CYPE 3D, it facilitates the layout of polygonal limits for footings.
- CYPEHVAC, CYPEHVAC Ductwork
This module is used to analyse and design air ducts in HVAC systems in CYPEHVAC and CYPEHVAC Ductwork.
- CYPEHVAC, CYPEHVAC Ductwork
This module is used to enter and check air handling units (AHU) in air conditioning systems in CYPEHVAC and CYPEHVAC Ductwork.
- CYPEHVAC
This module is used to select and use air-source heat pump systems in the systems developed in CYPEHVAC.
- CYPE 3D
The AL9 module allows CYPE 3D to use the extruded aluminium section editor, which is intended to facilitate the design and checking of aluminium alloy sections with special cross-sections.
- CYPE 3D, CYPECAD
Using the MAD module, CYPECAD and CYPE 3D analyse and design timber beams and generic bars.
- Arquimedes
This module is the basic core of the Arquimedes tools and is needed to run all versions of the program.
- Arquimedes
This module is used to manage the simultaneous access to the same database (bills of quantities or cost databases) for several users connected in a network by means of a configuration of permissions and access modes.
- CYPECAD
CYPECAD's AUT module has two options available that have been created to automatically generate the structure: Import of IFC files from CAD/BIM programs and Interpretation of DXF and DWG files.
- CYPE 3D
The NLT module is compatible with CYPE 3D and allows the program to perform the non-linear analysis of bars that work only in tension.
- CYPE 3D, CYPECAD
With the PLA module, CYPECAD and CYPE 3D can design, edit and check welded baseplates for any steel column layout and any type of material (rolled, reinforced and cold formed steel).
- Open BIM Cable Routing
This module can be used with Open BIM Cable Routing to perform BIM modelling of cable routing systems.
- Open BIM Signs
This module can be used with the Open BIM Signs program to carry out the BIM modelling of sign systems in buildings.
- StruBIM Box Culverts
The core module for using StruBIM Box Culverts and a prerequisite for running the program.
- CYPE 3D
The APG module is compatible with CYPE 3D and allows the program to determine the critical load factors and buckling deformations of the structure for each combination analysed by solving an eigenvalue problem.
