Grupo de contenido: Codes. Concrete structures
Norma Boliviana. Hormigón Estructural Implemented in CYPECAD and CYPE 3D.
Building Code Requirements for Structural Concrete (ACI 318M-11). Implemented in CYPECAD, CYPE 3D and Continuous beams. CYPECAD and CYPE 3D use the Advanced beam editor and Advanced column editor when applying this code.
This code was already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Recently, with the 2015.e version, it became part of the group of codes that can be used to carry out punching shear verifications in accordance with code criteria. Now in the 2015.f version, when the NTCRC:2004 code of Mexico […]
These codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, in the 2015.e version, these codes are implemented in “Punching shear verification” and hence, also in the punching shear check carried out by CYPECAD in accordance with code criteria. This check was implemented in CYPECAD in the […]
These codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, with the 2015.d version, the codes are implemented in “Punching shear verification” and therefore in the punching shear checks carried out by CYPECAD, in accordance with code criteria. This check was implemented in CYPECAD in the 2015.a version and, since […]
These design codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, with the 2015.b version, the codes have been implemented in “Punching shear verification” and hence, also in the punching shear verification carried out by CYPECAD. This check was implemented in CYPECAD in the previous version (2015.a) […]
Norma Brasileira ABNT NBR 6118 (2014). Projeto de estruturas de concreto – Procedimento. Implemented in CYPECAD, CYPE 3D (Metal 3D), Punching shear verification, Stairs, Flat slabs, Corbels, Great depth beams, Foundation elements and Continuous beams.
Eurocode 2: Design of concrete structures. SR EN 1992-1-1:2004/AC This code was already implemented in CYPE programs as of previous versions. Now, with the 2014.m version, when Eurocode 2 (Romania) is selected in CYPECAD, columns and beams are edited using their corresponding advanced editors. More information on CYPECAD’s advanced column editor. More information on CYPECAD’s […]
Concrete and reinforced concrete. Construction. Updated edition SNIP 52-01-2003. Moscow 2012. Implemented in CYPECAD, Metal 3D and Continuous beams. For this code, CYPECAD, Metal 3D and Continuous beams allow for: If the Russian concrete code is used together with its corresponding seismic code (СНиП II-7-81 – implemented in the 2014.b version), the ductility reinforcement criteria and capacity design criteria […]
These codes were already implemented as of previous versions. They were also included, in previous versions, in the group of codes which use CYPECAD’s advanced beam editor (which implies that as well as the advantages obtained from using this editor, detailed Ultimate Limit State reports and reinforcement tables can be automatically generated). Now, as of […]
Projeto de estruturas de concreto - Procedimento. This document is a project revision of the ABNT NBR 6118 2007 code, which is currently not in force, however it is foreseen that it will substitute the current standard. It has been implemented in CYPECAD (including Strut3D) and Metal 3D.
Indian Standard. Plain and reinforced concrete code of practice (Fourth Revision). This code was already implemented in CYPECAD. Now, with the 2014.b version, the time required for the design of the concrete columns has been optimised.
