Grupo de contenido: CYPE 3D / CYPE Connect Classic
The Polish National Annex to Eurocode 3 ("Design of steel structures - Part 1-8: Design of joints") for the design of joints in steel structures has been implemented into the following programs: CYPE 3D CYPE Connect Classic
In previous versions, connections fixed to column or beam flanges, welded or bolted, required web stiffeners. As of the 2016.a version, these connections can be defined without stiffeners. This option is available only to check the connection. If the connection is re-designed, stiffeners will be provided. Users has the option to delete the designed stiffeners […]
In versions earlier than the 2016.a version, the type of weld applied could not be edited. The welds are generally angle welds (except in connections with circular hollow sections and anchorage bolts). As of the 2016.a version, the type of weld can be edited. Users can choose amongst: The welds will be represented on the […]
Thread dimensions and lengths have been updated for all bolt series. Bolt series A307 has been increased up to diameter 4.
As of the 2015.f version, some types of welded and bolted I-section beam-beam and beam-column connections can be designed and checked in CYPE 3D and in CYPE-Connect when beams reach the web of the other beam, or to the flange or web of columns and are not at a right angle on plan. The maximum […]
As of the 2015.f version, welded and bolted I-section column-lintel connections designed and checked in CYPE 3D and CYPE-Connect, can have slightly eccentrically aligned webs. Both programs can design these connections whilst the projections of the webs of the column and lintel overlap in a plane perpendicular to that of the webs’.
