Grupo de contenido: Implementing codes and improving their enforcement
National Annex to CYS EN 1991-1-4:2005. Eurocode 1: Actions. Part 1-4: General actions – Wind actions. Implemented in CYPECAD.
Manual de Diseño de Obras Civiles por Sismo México 2015. Implemented in CYPECAD and CYPE 3D.
Reglamento para el Diseño Estructural Panameño 2014. Implemented in CYPECAD and CYPE 3D.
The seismic code of Peru (Norma Técnica E.030 (2014) Diseño Sismorresistente) has been implemented in CYPECAD and CYPE 3D.
Norma Ecuatoriana de la Construcción. Peligro sísmico. Diseño sismo resistente. Implemented in CYPECAD and CYPE 3D. As of the 2016.c version, users can opt, for this code, to use the design seismic spectrum defined by the code itself or a user-defined spectrum. For more information on which codes users can define the seismic spectrum for can be found […]
Building Code Requirements for Structural Concrete (ACI 318M-11). Implemented in CYPECAD, CYPE 3D and Continuous beams. CYPECAD and CYPE 3D use the Advanced beam editor and Advanced column editor when applying this code.
When the selected steel code is the CTE DB SE-A (Spain), EAE 2011 (Spain) or Eurocodes 3 and 4 (EU or any of Eurocode adaptations to other countries), the program allows users to choose thermomechanical rolled steel and Histar® rolled steel (ArcelorMittal). Compared to conventional steels, the elastic limit for these steels has been reduced depending on the nominal thickness of […]
These codes were already implemented in an earlier version of CYPECAD and CYPE 3D. Now, in the 2015.h version, users can define the seismic spectrum. A design spectrum must be defined for the seismic analysis of the structure. Each seismic code provides the criteria to be followed, within a specific territory, when considering seismic action […]
This code was already implemented in previous CYPECAD and CYPE 3D versions. Now, in the 2015.f version the possibility has been added to define a user seismic spectrum. A design spectrum must be defined to carry out a seismic analysis of the structure. Each earthquake-resistant code provides the criteria that are to be applied within […]
This code was already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Recently, with the 2015.e version, it became part of the group of codes that can be used to carry out punching shear verifications in accordance with code criteria. Now in the 2015.f version, when the NTCRC:2004 code of Mexico […]
Norma Chilena Oficial Diseño Sísmico de Edificions (Includes modifications of decree n° 61 (V. and U.) of 2011). This code was already implemented in previous CYPECAD and CYPE 3D versions. Now, with the 2015.e version, a user seismic spectrum can be defined. A design spectrum must be defined to carry out the seismic analysis of […]
Diseño estructural. Cargas de viento. Implemented in CYPECAD.
