Grupo de contenido: Implementing codes and improving their enforcement
These codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, in the 2015.e version, these codes are implemented in “Punching shear verification” and hence, also in the punching shear check carried out by CYPECAD in accordance with code criteria. This check was implemented in CYPECAD in the […]
Projeto de estruturas de concreto en situação de incêndio. Implemented in the “Fire resistance check” module and checks the fire resistance and designs the protective coatings for beams, floor slabs, columns, concrete shear walls and walls using the tabular method defined in this code. With this code, the “Fire resistance check” module carries out the […]
Normas Técnicas Complementarias para Diseño por Sismo para Guadalajara 1997. Implemented in CYPECAD and CYPE 3D.
Código Hondureño de la Construcción. Normas Técnicas. Capítulo 1. Cargas y fuerzas estructurales. Diseño por Sismo This code was already implemented in CYPECAD and CYPE 3D in previous versions. Now, with the 2015.d version, the new seismic map (which displays zones 3, 4 and 5) has been implemented and values between 0.10 and 0.60 can be introduced for the […]
Reglamento INPRES - CIRSOC 103 - Parte I - 2013. Normas Argentinas para Construcción Sismorresistente. Implemented in CYPECAD and CYPE 3D.
These codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, with the 2015.d version, the codes are implemented in “Punching shear verification” and therefore in the punching shear checks carried out by CYPECAD, in accordance with code criteria. This check was implemented in CYPECAD in the 2015.a version and, since […]
Cod de proiectare seismică P100, Partea 1 - P100-1/2013 Implemented in CYPECAD and CYPE 3D.
Indian Standard. General construction in steel – Code of practice (Third Revision). This code was already implemented in CYPECAD, CYPE 3D, Continuous beams and Portal frame generator to design and check rolled and welded steel bars. Now, in the 2015.b version, the code has been implemented in CYPE-Connect and in CYPE 3D for the design and check of steel connections.
These design codes were already implemented in CYPECAD, CYPE 3D and other CYPE programs as of previous versions. Now, with the 2015.b version, the codes have been implemented in “Punching shear verification” and hence, also in the punching shear verification carried out by CYPECAD. This check was implemented in CYPECAD in the previous version (2015.a) […]
These codes were already implemented in previous versions of CYPECAD and Metal 3D (CYPE 3D as of the 2015.a version). As of the 2015.a version, these design codes have been implemented for the design and check of steel connections in CYPE-Connect.
Norma Brasileira ABNT NBR 6118 (2014). Projeto de estruturas de concreto – Procedimento. Implemented in CYPECAD, CYPE 3D (Metal 3D), Punching shear verification, Stairs, Flat slabs, Corbels, Great depth beams, Foundation elements and Continuous beams.
Eurocode 2: Design of concrete structures. SR EN 1992-1-1:2004/AC This code was already implemented in CYPE programs as of previous versions. Now, with the 2014.m version, when Eurocode 2 (Romania) is selected in CYPECAD, columns and beams are edited using their corresponding advanced editors. More information on CYPECAD’s advanced column editor. More information on CYPECAD’s […]
