Grupo de contenido: Implementing codes and improving their enforcement
Reglamento nacional de edificaciones. Norma E.060 Concreto Armado. This concrete code was already implemented in CYPECAD, Metal 3D and in other CYPE structural programs. Now, in the 2013.m version, if users select the NTE E.060: 2009 code with its corresponding seismic design code (Norma Técnica E.030), CYPECAD’s Advanced beam editor and column editor may also be used. Additionally, by using this code combination, […]
Building Code Requirements for Structural Concrete (ACI 318M‑08). This concrete code was already implemented in CYPECAD, Metal 3D and in other CYPE structural programs. Now, in the 2013.m version, if users select the ACI 318M-08 code and combine it with the NBDS 2006 Bolivian seismic code, CYPECAD’s Advanced beam editor and column editor may also be used. Additionally, by using this code combination, CYPECAD applies the ductility […]
EN ISO 10077-1 has been implemented in the Air Conditioning tab of CYPECAD MEP to calculate, in accordance with this code, the thermal transmittance coefficient for windows and the linear thermal bridge between the carpentry and glazing. Reference to this code can be seen in the Thermal parameters dialogue box (Job > Thermal parameters in the Air Conditioning tab). Depending on […]
Minimum Design Loads for Buildings and Other Structures International Building Code. Puerto Rico Building Code. These codes were already implemented in CYPECAD and Metal 3D as of previous versions for use with the dynamic analysis method (spectral modal). For this code, the 2013.l version includes in CYPECAD: Users can select the analysis method (dynamic or static) using the Analysis method option within […]
Código Sísmico de Costa Rica 2010. This concrete load was already implemented in CYPECAD and Metal 3D as of previous versions. As of the 2013.l version, if users select the CSCR-2010 code and combine it with the ACI 318-08 (USA) concrete code or NCh430.Of2008 (Chile) concrete code, CYPECAD’s Advanced beam editor and column editor may also be used. Additionally, the U.L.S. reports for columns […]
Normas Argentinas para Construcción Sismorresistente. Parte II: Construcciones de Hormigón Armado. The 2013.l version of CYPECAD includes the CIRSOC 103-2005 seismic code. This code contemplates reinforcement ductility criteria and the capacity design criteria for seismic design, which are to be used with the CIRSOC 201-2005 concrete code (Reglamento Argentino de Estructuras de Hormigón). Application of the CIRSOC 103-2005 seismic code is obligatory […]
Normas Argentinas para Construcción Sismorresistente - Proyecto de Reglamento CIRSOC 103, Parte I: Construcciones en general. The 2013.l version of CYPECAD includes the CIRSOC 103-2008 code (code that will substitute the CIRSOC 103-1991 code) to be used together with the CIRSOC 201-2005 concrete code (Reglamento Argentino de Estructuras de Hormigón). The combination of CIRSOC 103-2008 or CIRSOC 103-1991 together […]
Reglamento Argentino de Estructuras de Hormigón. This concrete code was already implemented in CYPECAD and Metal 3D as of previous versions. As of the 2013.l version, if users select the CIRSOC 201-2005 code and combine it with CIRSOC 103-1991 (current seismic code of Argentina) or CIRSOC 103-2008 (seismic code which is due to substitute the CIRSOC 103-1991 code), CYPECAD’s Advanced beam editor and column editor may also be used. […]
Uniform Building Code. This seismic load was already implemented in CYPECAD and Metal 3D as of previous versions. As of the 2013.k version, if users select the 1997 UBC (USA) code and combine it with any of the concrete codes CYPECAD allows to be used with the Advanced beam editor, the editor may also be used. Additionally, the U.L.S. reports […]
Norma Chilena Oficial. Diseño Sísmico de Edificios. This code was already implemented in CYPECAD and Metal 3D, as of previous versions. As of the 2013.j version, if this code is used together with the NCh430.Of2008 concrete code, users can also use CYPECAD’s advanced beam editor.
Improvements have been implemented in the following seismic codes: Construcciones sismo resistentes. Requisitos básicos para el diseño y construcción. Reglamento Colombiano de Construcción Sismo Resistente (2010). These codes were already implemented in CYPECAD and Metal 3D, as of previous versions. They are used in CYPECAD together with the ACI 318M-08 (USA-International) code. As of the 2013.j version, if users select […]
Construcciones sismo resistentes. Requisitos básicos para el diseño y construcción. This code was already implemented in CYPECAD and Metal 3D as of previous versions. It is used in CYPECAD together with the ACI 318M-08 (USA – International) concrete code. As of the 2013.j version, if users select the ACI 318M-08 (USA International) code and combine it with this seismic code, they […]
