Grupo de contenido: Implementing codes and improving their enforcement
ABNT NBR 14762:2010 (Brazil)Dimensionamento de estruturas de aço constituídas por perfis formados a frio. This Brazilian code has been implemented for cold formed steel sections. The sections which can be used are the same as those available with the NBR 14762:2001 code, which is currently no longer in force. Both codes are implemented in CYPECAD, […]
ABNT NBR 8800:2008 (Brazil)Projeto de estruturas de aço e de estruturas mistas de aço e concreto de edificios. As of the 2012.b version, Composite sections have been included for this Brazilian code. The ABNT NBR 8800:2008 code was implemented in previous versions for the design of welded and bolted connections resolved by the Joints I, Joints II, […]
NTE E.060: 2009 (Peru)Concreto armado Implemented in CYPECAD and Metal 3D.
NTCRC:2004 (Mexico)Normas técnicas complementarias para diseño y construcción de estructuras de concreto para el Distrito Federal Implemented in CYPECAD and Metal 3D.
NCh430.Of2008 (Chile)Hormigón armado - Requisitos de diseño y cálculo Implemented in CYPECAD and Metal 3D.
The following codes have been implemented in the Embedded Retaining Walls program: These codes were already implemented in the Reinforced concrete cantilever walls program, CYPECAD and Metal 3D.
CBH 87 (Bolivia)ICS 91.080.40 Estructuras de hormigón. Año 1987 Implemented in CYPECAD and Metal 3D.
ABNT NBR 6118:2007 (Brazil)Projeto de estruturas de concreto – Procedimento Implemented in CYPECAD and Metal 3D.
The following rolled steel codes have been implemented for the five joints modules (Joints I, Joints II, Joints III, Joints IV and Joints V):
NCh433.Of1996 Modified in 2009 (Chile). Official Chilean Code. Seismic Design of Buildings. Implemented in CYPECAD and Metal 3D. Includes the emergency modifications presented in the Decree Nº117 (V. and U.) of the Diario Official de Chile of the 14th February 2011.
NSR-10 (Colombia): Reglamento Colombiano de Construcción Sismo ResistenteCode implemented in CYPECAD and Metal 3D.The NSR-10 code substitute the outdated NSR-98 code. Nonetheless, any of the two codes can be used in CYPECAD and Metal 3D.
ASCE/SEI 7-05 (USA International): Minimum Design Loads for Buildings and Other Structures.Code implemented in CYPECAD.Implemented in the Portal frame generator as of the 2010.m version.
