Grupo de contenido: Implementing codes and improving their enforcement
CFE 2008 (Mexico): Manual de diseño de Obras Civiles. Diseño por sismo. Comisión Federal de Electricidad. México 2008.Code implemented in CYPECAD and Metal 3D.
R.N.V.99 D.T.R. C 2-4.7 (Algeria)Code implemented in CYPECAD.Implemented in the Portal Frame Generator as of the 2010.b version.
Ordinance nº 3, 21st July 2004 (Bulgaria).Basic principles for structural design and their applied actions. Section VI: Wind loads.Code implemented in CYPECAD.Implemented in the Portal Frame Generator as of the 2010.m version.
Eurocode 1 (National application document for Belgium) - prNBN EN 1991-1-4 ANB (2009).Code implemented in CYPECAD.Implemented in the Portal Frame Generator as of the 2010.a version.
DIN 18800:2008-11 (Alemania): Deutsches Institut für Normung. Stahlbauten.Code implemented in CYPECAD and Metal 3D for the following sections: Rolled and welded steel Cold-formed steel
Composite sections made up of simple sections which are already implemented can be used with the following codes: AISI/NASPEC-2007 (LFRD) (USA), AISI/NASPEC-2007 (LFRD) (Mexico) and CAN/CSA S136-07 (Canada) (as of the 2011.a version). The simple sections and their corresponding composition to create composite sections are:
Eurocode 3The corrections undertaken by the CEN (European Committee for Standardization) have been implemented in the following documents (as of the 2011.a version) These implementations affect the use of Eurocode 3 for any of the countries that may be selected with this code (International, Bulgaria, France and Portugal). The following National documents of Eurocode 3 […]
CPE INEN 5:2001 (Ecuador)Construction code of EcuadorGeneral Design Requirements: Seismic danger, Design Spectrum and Minimum Calculation Requirements for Seismic-Resistant Design.Implemented in CYPECAD and Metal 3D (as of the 2011.a version).
IS:875: (Part4) – 1987 (Reaffirmed 1997) (India)Code of Practice for Design Loads (other than earthquake) for Buildings and Structures. Part 4 - Snow LoadsImplemented in the Portal frame generator (as of the 2011.a version)
IS:875: (Part3) – 1987 (Reaffirmed 1997) (India)Code of Practice for Design Loads (other than earthquake) for Buildings and Structures. Part 3 - Wind Loads.Implemented in CYPECAD and the Portal frame generator (as of the 2011.a version).
