Grupo de contenido: New program or module
As of the 2017.b version, IFC Builder can read point clouds and take them as a reference for the development of existing buildings. This tool has been developed as part of the “New construction processes using 3D printing (3DCONS)” investigation project. This module is included in IFC Builder and, like IFC Builder, is free to […]
As of previous versions, users have been able to introduce “Generic” structural timber elements in integrated 3D structures in CYPECAD and CYPE 3D using the “Timber sections” module. Further features have been added to the “Timber sections” module with the 2017.a version. Now, users can introduce beam-type timber elements in CYPECAD and CYPE 3D. By […]
The “Timber joist floor slabs” module has been implemented in the 2017.a version, with which CYPECAD analyses and designs timber joist floor slabs. A summarised description of this module can be found in the “Timber joist floor slabs” section of the new features of CYPECAD. More information on the introduction, analysis and design of the timber […]
IFC BUILDER Creation and maintenance of building IFC models. This application is integrated in the OPEN BIM workflow via the IFC4 standard. Features: StruBIM Analysis 3D StruBIM Analysis 3D is a tool created to generate, edit and design an analysis model that has been developed based on a structural model. The analysis of the acting […]
Using the “Composite steel and concrete columns” module, CYPECAD and CYPE 3D can check composite steel and concrete columns in accordance with the “EN 1994-1-1” and “ANSI/AISC 360-10” codes. The code to be used for the composite column check is not selected directly as is done with the concrete and steel codes. The program applies […]
The new Arquimedes module “Bill of quantities of Revit models” creates a direct connection between Arquimedes (CYPE) and Revit (AutoDesk) (2015 and later versions), and has been designed to obtain the quantities and generate the bill of quantities based on a Revit BIM model. The module installs a CYPE plug-in in Revit. This allows users […]
CYPETHERM ISO 13788 (located in the Building Services group of the main CYPE program menu) is an easy-to-use application which allows users to analyse the internal surface resistance factor by taking into account the critical surface humidity and interstitial condensation in construction elements. The program carries out the analysis based on the hygrothermal behaviour of […]
CYPETHERM ISO 10211 is an application conceived to determine the thermal transmittance of linear thermal bridges by solving and processing a finite element heat transfer analysis model, based on the UNE-EN ISO 10211 code. This application is located in the Building services group of the main CYPE program menu. This program is part of an […]
CYPETHERM LOADS is an application conceived to analyse the thermal loads in buildings, and incorporates the Radiant Time Series Method (RTSM), proposed and recommended by the “American Society of Heating, Refrigerating and Air-conditioning Engineers” (ASHRAE) to calculate the cooling thermal loads, and the procedure to calculate the heating loads; both described in the “Load Calculation […]
Radiant and cooling ceiling is a CYPECAD MEP module integrated in the Air conditioning tab. The module has been conceived to design invisible air conditioning systems using radiant and cooling ceilings of two types: modular technical dropped ceilings and continuous dropped ceilings. Ceiling types and installation components The radiant and cooling ceiling air conditioning systems […]
CYPE-Connect is a program to check, design and generate the detailing of welded or bolted steel connections composed of rolled steel I sections. CYPE-Connect is available in the Structures group of the main CYPE program menu. The types of joints that are designed are those included in the following joints modules (modules available for use with CYPECAD […]
CYPECAD contains a software tool which allows for a dynamic analysis to be carried out on buildings with seismic loads acting upon them, which includes the effects of the non-structural construction elements used in the façades and partitions of the building, and considers various behavioural models of the building corresponding to different situations or states […]
