Viewing results on screen

After the analysis, the program displays the results on the screen when selecting an element of the installation via "Nodes", "Information", or via "Sections", "Information".

This includes the analysis data of the nodes and the analysis data of the sections, with results by laodcases, combinations or envelopes.

Reports

The program can be used to print the reports directly or to generate HTML, PDF, TXT, RTF or DOCX files.

The reports are obtained via the "Reports" option in the "File" menu or from the right-hand side of the top toolbar.

The following reports are available:

• Calculation report
  Prints the general report of the installation. It includes the following sections, which can be activated or deactivated:
  • Gas network description (optional)
  • Description of the materials used (optional)
  • Soil descriptions (optional)
  • Formula (optional)
  • Combinations (optional)
  • Node report (optional)
  • Span report (optional)
  • Envelope (optional)
  • Quantities (optional)
  • Excavation measurements (optional)

• Node report
  Prints the report of the results in the nodes. It includes the following information, which can be activated or deactivated:
  • Node numbering (optional)
  • Coordinates (optional)
  • Delete transition nodes (optional)
  • Installed flow (optional)
  • Required flow (optional)
  • Piezometric head (optional)
  • Available pressure (optional)
  • Comments (optional)

Drawings

The program can print the job drawings on any graphic peripheral configured on the computer or create DWG, DXF or PDF files.

The drawings are obtained from the "Drawings" option in the "File" menu or from the right-hand side of the top toolbar.

The following drawings are available:

Utilities drawing

Shows the drawing of the installation on the plan.

The editing of the drawing offers the following options:

• Loadcase/Combination
  Selects the loadcase, combination, envelope or oscillation for which data is to be displayed in the drawing.
• Nodes (optional)
  Displays the input information and analysis results of the nodes:
  • Size
  • Node references (optional)
  • Transition nodes (optional)
  • Calculation properties (optional)
    • Options: Flow, Depth, Ground level elevation, Elevation fill
• Spans (optional)
  Displays the input information and analysis results of the spans:
  • Line thickness
  • Length of spans (optional)
  • Calculation properties (optional)
    • Options: Dimension, Material, Flow, Pressure drop, Velocity
• Information texts
  • General information table (optional)
  • Quantities information table (optional)
  • Excavation information table (optional)
• Scale
• Details

Longitudinal section drawings

Shows the longitudinal sections of the installation.

The editing of the longitudinal profile drawing offers the following options:

• Loadcase/Combination
  Selects the loadcase, combination, envelope or oscillation for which data is to be displayed in the drawing.
• Line thickness setting:
  • Ground level (optional)
  • Line of modified soil (optional)
  • Conduction line (optional)
  • Double line in conduits (optional)
    • Línea de fondo de excavación (optional)
  • Pits (optional)
• Text size
• Horizontal scale
• Vertical scale
• Alignment angle
• Arrangement
  Edits the data to be displayed in the information arrangement under each longitudinal section.
• Spans
  Edits the data to be displayed on each section of the longitudinal section.
• Details