Terminal units. Air-conditioning terminal unit
Air-handling terminal units refer to the air supply terminals (diffusers, grilles, nozzles, etc.) into which the ducts of all-air systems discharge.
In the program, these must be connected to an air-conditioning system (such as an air-conditioning unit), depending on their type.
| Note: |
|---|
| If the air-conditioning terminal unit is connected to an air-handling system with an external air intake or to a centralised ventilation system, the ventilation option "Via the air-conditioning system" must be selected on the zone panel. |
Air supply outlet
This terminal unit represents an air-supply terminal connected to a constant-flow all-air system or a centralised ventilation system, depending on the option selected.
Air conditioning system
System
- Air handling unit, constant air flow system
Select a constant-flow all-air system air-handling unit as defined in the "Air-conditioning systems" section, or enter one directly.
Air supply
- Maximum air flow rate (optional)
Reheat (optional)
- Heat accumulator (Hot water / Electric / Gas)
Adjust the heat accumulator settings:- Hot water
- Water-based heating system
Select a water-based heating system defined in the "Heating and cooling systems" section or enter one directly. - Rated power
- Advanced settings:
- Rated inlet water temperature
- Rated outlet water temperature
- Rated inlet air temperature
- Rated outlet air temperature
- Water-based heating system
- Electrical
- Nominal capacity
- Gas
- Nominal capacity
- Hot water
Central ventilation system
System
- Central ventilation system
Select a central ventilation system defined in the "Air-conditioning systems" section or enter one directly.
Air supply outlet, dual duct
This terminal unit represents an air-handling unit connected to a constant-flow, dual-duct all-air system.
System
- Air handling unit, constant flow all-air system with double duct
Select an air-handling unit for a constant-flow all-air system with dual ducting as defined in the "Air-conditioning systems" section, or to enter the details directly.
Air propulsion
- Maximum air flow rate (optional)
Variable air flow box
This terminal unit is a variable air volume unit connected to a variable air volume all-air system.
System
- Air handling unit, variable airflow system
Select an all-air system air-handling unit with variable flow, as defined in the "Air-conditioning systems" section, or to enter the details directly.
Air supply
- Maximum air flow rate (optional)
- Minimum air flow fraction (optional)
Fan (optional)
- Specific power
- Advanced settings:
- Position (Series / Parallel)
- By default
- Motor efficiency
- At the same time
- Motor efficiency
- Fraction of airflow to activate the fan
- By default
- Position (Series / Parallel)
Reheat (optional)
- Heating coil (Hot water / Electric / Gas)
Adjust the heat accumulator settings:- Hot water
- Hot-water system
- Gross rated capacity
- Advanced settings:
- Rated inlet water temperature
- Rated outlet water temperature
- Rated inlet air temperature
- Rated outlet air temperature
- Electric
- Gross rated capacity
- Gas
- Gross rated capacity
- Hot water
Variable air volume box, dual-duct
This terminal unit is a variable air volume unit connected to a variable air volume, dual-duct all-air system.
System
- Air handling unit, variable flow all-air system with double duct
Select an air-handling unit for a variable-flow all-air system with dual ducting as defined in the "Air-conditioning systems" section, or to enter the details directly.
Air supply
- Maximum air flow rate (optional)
- Minimum air flow fraction








