Introduction
CYPE FRP is a program used to design and analyse FRP (Fibre-Reinforced Polymer, including carbon fibre laminates) reinforcement in reinforced concrete sections.
The program allows users to design, size and check flexural and shear strengthening solutions for beams, as well as column strengthening through FRP confinement.
To do this, download the manufacturers’ catalogues for the required FRP reinforcements and select a standard from those available, such as ACI 440 or TR55 (Technical Report 55). Next, define the cross-section and reinforcement of the structural member, as well as the loads acting upon it.
The program checks and verifies whether the section complies without reinforcement and, where necessary, allows the required FRP reinforcement to be defined and dimensioned.
Finally, the software provides detailed reports covering the design criteria and codes and standards applied, the calculation assumptions, the FRP strengthening solutions specified, the load combinations considered and the results obtained.


