Supply connection point

Enters the supply connection points of the water supply system.

The following parameters can be configured when entering or editing a supply connection point. Some parameters only appear if the “Simplified entry” option in “Design options” under “General options” is deactivated:

• Reference
  Element reference. This value can be locked or unlocked. The program will create or modify the reference when updating results if unlocked.
• Supply connection reference
  The type of supply connection point can be selected by reference. These types can be created and edited from "Design and check options to be carried out" in "General options", in the "Project" group.
• General data
  The element's general data can be defined. Some of these values can be locked or unlocked. If a value is locked when updating the results, it is not modified and remains unchanged.
  • Temperature (Lock/Unlock)
  • Flow (Lock/Unlock)
  • Pressure (Lock/Unlock)
• Public network (optional)
  Indicates that the connection is to a public network. In this way, the available flow and pressure can be entered:
  • Flow
  • Pressure
• 3D layout
  The position and angle of the element can be defined. This section only appears when editing a previously entered element.
  • Position (x, y, z)
  • Angle
• Label (optional)
  The information visible in the element's label can be managed.
  • Reference (optional)
• Bill of quantities
  The element's bill of quantities generation can be controlled by filters.
  • Supply connection point
• Checks
  The checks carried out on the element can be consulted and listed. The program will check that the flow and pressure data entered in the “Public network” section are enough to cover the values defined in the "General data" section.