Receivers

Defines the receivers and inserts them manually into the workspace by selecting a point on the floor plan. The spatial arrangement of the receiver points is determined at the user’s discretion.

The program requires the following parameters to be defined:

• Reference
  Recipient's reference number.
• Transmitters
  Selects a emitter from those previously created, and specify:
  • Distance to the emitter
    Sets and locks the distance between the receiver and the transmitter. If it is not locked, the program will automatically calculate and assign the distance.
  • Structural elements
    Creates or edits structural elements by selecting the element type (wall, roof, floor slab, floor, door or window), the specific type and the quantity. You can lock this section to prevent the program from modifying it during the analysis. Alternatively, you can leave it blank so that the program assigns it automatically during the analysis.
  • Results
    Displays the following results for each operating frequency:
    • Frequency band [MHz]
    • Power of the signal of the emitter [dBm]
    • Gain of the emitter antenna [dBi]
    • Signal propagation due to distance [dB]
    • Signal propagation losses via floors [dB]
    • Signal propagation via walls [dB]
    • Total signal propagation loss [dB]
    • Signal power in the receiver [dBm]