Using CYPE Health and safety, the excavations required during the job phases can be located in the "Excavations" section. The period in which these excavations will be on the job can also be defined, specifying both their initial construction phase and their final phase. All this assigned data can be edited using the "Edit" tool.

When adding a "Pit", the type, either circular or rectangular, as well as the dimensions and depth of the pit can be specified.

When creating a "Trench" the width and depth of the trench, both initial and final, can be defined, allowing the exact dimensions of the trench to be set. The length of the trench is defined by two points in the working area.

When adding "Emptying", the slope inclination and depth of the slope can be set. To complete the insertion, the perimeter of the excavation is simply delimited.