Air handling units
The "Air handling units" module is used to enter and check air handling units (AHU) in air conditioning systems in CYPEHVAC and CYPEHVAC Ductwork.
With the permission for this module, users can choose whether to use one program or the other to enter and check air handling units, depending on the capabilities of each program, their interests and needs.
UTA Module in CYPEHVAC
The "Air handling units" module can be used to enter and carry out the analysis and checking of air handling units for a 2-pipe or 4-pipe system in CYPEHVAC.
When using CYPEHVAC, users can import a geometric model and the analysis of thermal loads carried out with other technologies by linking it to a BIMserver.center project. Then, using the appropriate combination of modules, including the "Air handling units" module, the necessary data is configured in the program and the different elements of the air conditioning systems are entered for analysis, design and checking.
Detailed information on the features of CYPEHVAC can be found on this page.
UTA module in CYPEHVAC Ductwork
The "Air handling units" module is used to enter and carry out the analysis and checking of air handling units (AHU) in CYPEHVAC Ductwork.
When using CYPEHVAC Ductwork, users can import a geometric model and the analysis of thermal loads and ventilation flow rates carried out with other technologies by linking it to a BIMserver.center project. Then, the data needed is configured in the program and the units and air ducts are entered for their analysis, design and checking, including the air handling units if this module is available.
Detailed information on the features of CYPEHVAC Ductwork can be found on this page.
