Archives: Descripciones de productos
Creates the geometry and loads of frames made up of rigid nodes and roof and floor trusses in a quick and simple way. Provides users with the design of roof and lateral façade purlins, optimising their section and separation. The wind and snow loads are calculated automatically, according to the selected code, the user only having to select the location […]
Program features Sewerage networks are gravity-fed systems. The discharge point or sewage dump may be a sump pump, emitters or an existing sewerage network. The minimum depth of the pipe may be limited. Different formulas can be used when designing sewer ducts: Manning-Strickler, Prandtl-Colebrook, Tadini, Bazin, Sonier, Kutter or Ganguillet-Kutter. Editing longitudinal sections. An interactive […]
Program properties The consumption can be entered as flow or as heat power to be installed at the node. In installations with combustible gases, the consumption at a node can be expressed as heat power. However, for industrial consumption or large commercial areas, the total consumption will be calculated as the direct sum of the […]
Program features Fast network introduction, with no design limits, that can be supplied by one or several points. It uses a simultaneity coefficient to increase or reduce the consumption and an increase coefficient for drops caused by special elements. The analysis is carried out according to the duct types, diameters, required flow and supply pressures. […]
Description Open BIM Switchboard has been created for designing panels in electrical installations (cabinets, panels and switchboards). To begin working with Open BIM SWITCHBOARD, users must be connected to a previously created BIM model. The program imports building geometry from the BIM model if it is present. Additionally, if programs such as CYPELEC Core, CYPELEC […]
Workspace CYPELEC MULTILINE is a program that generates the circuit diagram of an electrical installation. To do so, the program has two complementary work modes: All the protection elements and other equipment linked to each line are reflected in the corresponding span according to their polarity. The symbols used can be chosen from a series […]
Description CYPEHVAC Radiant Floor is a programme developed for designing HVAC installations with generic radiant floor systems. The programme is included in the Open BIM workflow and is available to be downloaded on the BIMserver.center platform. CYPEHVAC Radiant Floor replaces the tools available in previous versions of CYPETHERM HVAC for designing hydronic HVAC systems for […]
Program description CYPETHERM Improvements Plus is a tool designed to carry out the energy audit of buildings and analysis of possible improvement measures, with an energy and economic study of the different alternatives, aimed at connecting with CYPETHERM programs with the EnergyPlus™ analysis engine (CYPETHERM EPlus, CYPETHERM HE Plus and CYPETHERM SCE-CS Plus). "CYPETHERM Improvements […]
