2027.b Version

NEW FEATURES

2027.b Version

Publication date:
November 17, 2026

Version 2027.b includes a unified access system via myCYPE, which allows users to sign in to CYPE’s various platforms – such as BIMserver.center, the online CYPE Cost Database and CYPE Mentor – using a single account. Furthermore, if the email address for the account matches the one associated with the CYPE licences, users can view their licence details via myCYPE and generate a "Licence ownership certificate", showing the licence holder, licence number, version and modules included.

In addition, a new type of licence, "myCYPE", has been added, which can be used to access the programs by signing in to myCYPE.

Version 2027.b includes a new notification system that lets you receive alerts when the analysis process begins and ends in CYPECAD, CYPELUX and CYPECAD MEP.

To enable this feature, you must sign in to myCYPE via the app and enable the "Notify me when the analysis is complete" option, available under "Settings > Notifications". Notifications are sent to the user’s BIMserver.center account.

Version 2027.b optimises the reading of IFC files through the parallel processing of rendering blocks. This improvement makes more efficient use of processor resources and reduces model loading times.

CYPE Menu now includes two new shortcuts: "Favourites", for selecting and organising the apps displayed on the main interface, and "Install programs", for carrying out multiple installations, which detects the apps available based on the user’s licence.

Version 2027.b includes new display options for DXF/DWG templates imported into CYPE apps. From the "Template views manager" window, you can select the colour mode for each template: "Original", "Faint", "Greyscale" or "Black and white".

Version 2027.b includes CYPE FRP, a new program for designing reinforced concrete structures using fibre-reinforced polymer (FRP) composites.

CYPECAD now includes the option to work with pile-supported foundation slabs and beams, expanding the options available for designing and analysing foundations.

In CYPECAD, when sharing the BIM model with BIMserver.center, with the quantities export option enabled, the quantities of reinforcement for structural elements are calculated using new, specific Property Sets.

CYPECAD and CYPE 3D include detailed reports for footings in accordance with the criteria of the Spanish structural code "Código Estructural" (concrete) and the Spanish technical building code CTE (geotechnical design) in Spain, as well as Eurocodes 2 and 7 in other European countries.

Version 2027.b expands the international scope of CYPE’s software with the implementation of new standards:

  • CYPECAD – Concrete structures: Argentina CIRSOC 201-2025 and Sweden SS-EN 1992-1-1/NA.
  • CYPECAD, CYPE 3D and CYPE Connect – Cold formed steel: Sweden SS-EN 1993-1-1/NA.
  • CYPECAD, CYPE 3D and CYPE Connect – Rolled steel structures: Sweden SS-EN 1993-1-3/NA.
  • CYPECAD – Seismic actions: Peru NT E.030 (2026).
  • CYPECAD and Portal Frame Generator – Wind actions: Sweden SS-EN 1991-1-4/NA.
  • Portal frame generator – Snow actions: Sweden SS-EN 1991-1-3/NA.
  • CYPECAD – Load combinations: Sweden SS-EN 1990/NA.

Deflection calculations in CYPE 3D have been improved to include the option of using characteristic, frequent and quasi-permanent combinations for Serviceability Limit States (SLS).

CYPE 3D includes the option to account for initial geometric imperfections in structures by means of notional loads, which represent their effects through equivalent horizontal forces.

This feature expands the capabilities of second-order structural analysis (P-Δ and P-δ) using the OpenSees analysis engine.

As of version 2027.b, CYPE 3D allows users to define "Force–displacement" axial plastic hinges to analyse plasticisation under tensile yielding or buckling under compression in elements such as bracing members, trusses and tie rods.

The new library includes elastic hardening options, generic models by span and the ASCE 342-22 standard, and is fully integrated with the calculation process and viewing of results via "Pushover analysis".

In CYPE 3D, users can now create and use concrete with user-defined properties by editing specific libraries.

As of version 2027.b, CYPE 3D allows users to edit the axial, bending and torsional stiffness factors of bar elements individually or by selecting multiple elements from the "Bar" menu.

These coefficients modify the corresponding terms of the stiffness matrix in both linear and non-linear analyses, taking precedence over the general column adjustments and directly affecting the structure's displacements, deflections, vibration modes and the redistribution of forces.

CYPECAD, CYPE 3D and CYPE Connect now include a new type of cross-section, expanding the range of section types available for structural modelling and analysis.

New features for importing and exporting steel plates between CYPE 3D and CYPE Connect have been added, facilitating the exchange of information between the two programs. This improvement allows the geometry, properties and layout of the plates to be reused in the CYPE Connect model.

CYPECAD now includes the option to export structural data in JSON format for use in CYPE Connect, facilitating the exchange of data between the two programs. One of its key advantages is the ability to specify composite sections, the definition of which is not included parametrically in the IFC format.

Connection sheets include new predefined tables to facilitate the documentation and monitoring of quantities for the components of each connection. This improves the clarity of the graphical documentation and speeds up the process of obtaining detailed quantities.

Version 2027.b includes several improvements and enhancements for CYPECAD, CYPE 3D, CYPE Connect and StruBIM Shear Walls, including performance optimisations, usability improvements, new features and the resolution of issues reported by users. For further information, click on the "Details" button:

Details

CYPECAD

  • The input of ground data for foundation beams and foundation slabs has been improved. Now, if the values for the foundation beam or foundation slab are the same as those defined under "General data – Foundation data", they do not need to be defined in the element. Simply leave the "Site data" option unticked.
  • The foundations of reinforced concrete columns with a standard cross-section have been improved in specific cases where the foundation cannot be constructed as defined: sections with openings; if there is a corner without a bar, a bar is added at that corner; if there are grouped bars at any corner or on any face, they are treated as individual bars; "free" bars are not taken into account.
  • The "Lock reinforcement of concrete block walls" tool has been added.
  • The "Orthogonal On/Off" feature has been improved. When you enter a point, holding down the SHIFT key acts as if the feature were enabled.
  • The "Export to CSV" tool has been improved. When a dynamic earthquake has been defined for the project, the export of design forces now includes CQC combinations.
  • "Slab ordering criteria" has been improved. The "Row/Column grouping tolerance" option has been added. This value defines the margin used by the program to determine whether two slabs are sufficiently aligned and can be considered part of the same row or column.
  • The tools “Flat/Waffle slabs > Modify reinforcement > Modify diameters/spacing” and “Flat/Waffle slabs > Modify reinforcement > Define reinforcement” have been improved. Users can now change the "Longitudinal"/"Transverse" and "Top"/"Bottom" selections directly whilst modifying or entering reinforcement, without having to exit the tool or go back to make a new selection.
  • The "Envelopes – Stresses at the base of the footings" tool has been improved. The display of the equivalent stress polygon has been added via the "Bearing capacity (equivalent area)" option.
  • The "Visible dimensions" tool in the "Column definition" tab has been improved. The last selection is now saved so that it remains in place when you return to the program.
  • The "Flat/Waffle slabs – Redesign" tool has been improved. The final design report is no longer displayed every time the tool is used.
  • The processing speed for the design of beam frames has been optimised. Previously, due to various corrections made in the previous version, this process had become slower.
  • The "Geometry of typical shear walls used" table in the "Job data report" has been improved. It now displays precision in millimetres to avoid text such as the following: "0.13+0.13=0.25", when it is actually "0.125+0.125=0.25".
  • An error that would occur when analysing a structure with walls in contact with columns entered using the "Enter a column with its start on another column" option, where the lower group of the wall coincided with the lower group of those columns, has been fixed.
  • An error that could very occasionally occur when extending beams or walls, and which prevented the program from continuing, has been fixed.
  • An error that occurred when selecting "3D View" has been fixed. This error could occur if "Continuous reinforcement" had been selected in any group of a concrete wall.
  • The "Analytical Model" and "Deformed Shape" tools in the "Results" tab have been improved. Previously, these tools were not activated in structures consisting solely of slabs and/or grid-type floor structures.
  • The "Delete floors" tool has been improved. Users can no longer delete floors that serve as the base for other columns. Previously, these floors could be deleted, which led to inconsistencies in the data for these columns.
  • An error, which could very occasionally occur when deleting or modifying drop panels and which prevented the program from continuing to run, has been fixed.
  • The editing of foundation elements has been improved. After confirming the editing of an element, the foundation model is analysed again to take account of the changes made, both when re-editing that element and when editing others. Previously, this re-analysis was only carried out after exiting the "Foundation Elements – Edit" tool.
  • The warning message displayed when there are elements with different allowable stresses has been improved. Now, when you click the "More information" option in this warning message, a list of all the elements is displayed, grouped according to their allowable stresses.
  • The floor plan settings have been improved. There is now a "Configure references for bar positions" option, which allows you to edit these values in the same way as in the settings for other plans.
  • Wall elevation plans have been improved. The option to select "Millimetres without decimal place" has been added under "Dimension".
  • An error that could occur when defining staircases where the first or last flight corresponded to an "Intermediate landing" type landing with lateral supports has been fixed.
  • "Project comments" has been improved. Users can now resize the panel to make it easier to view the images included in the comments.
  • An error that occurred when analysing a structure with overlapping footings where the "Consider soil-structure interaction" property was enabled has been fixed.
  • The automatic assignment of reference numbers when adding staircases and ramps has been changed. Previously, after entering a staircase with the reference "Garage staircase", "Garage staircasf" was suggested for the next one. Now "Garage staircase" is suggested again, so the user must enter a reference number that does not already exist. However, if the last word of the reference contains one or two characters, these are incremented; for example, after "Garage staircase 1", "Garage staircase 2" is suggested.
  • The "Deflection between two points" tool in the "Contour plots" tab has been improved by adding the "Scale factor" property, which allows the display of the scale to be adjusted, thereby preventing the associated information from being cut off the screen.
  • An error that could occur when sorting the "Sloped floor slabs/El. Changes" table has been fixed. After reordering the rows, the "Assign" option could apply to an element other than the one shown in the selected row.
  • The "Loads – Building elements" menu has been improved. The "Show material" tool has been added.
  • An error that could occur when designing frames with rectangular sections with flanges has been fixed. The error occurred after transforming a rectangular section into a rectangular section with flanges whilst the frame’s reinforcement was locked.
  • The deflection check in the beam editor has been improved so that deflections are redrawn correctly when enabled. Previously, they were not displayed when accessing this check if they were already enabled, so users had to disable and then re-enable one of the deflection options.
  • Several errors that could occur in the "Edit section" tool when editing frames have been fixed.

CYPE 3D

  • Hollow structural sections: adaptation of hollow structural section checks to comply with the Brazilian standard NBR 8800, taking into account the requirements of NBR 16239 for the design of hollow section joints.
  • Dark mode: updated icons for the nodal loads, bar loads and external restraint tools to improve their visibility in dark mode.

CYPE Connect

  • Manual definition of continuous bars in connections: previously, the program automatically determined, based on the connection’s geometry, whether a bar would end at the node or, conversely, whether it was a continuous bar and the connection was located at a point midway along its length. With this improvement, this condition can be edited individually for each bar using the "Type" parameter in the connection’s "Modelling options".
  • Parametric joints: the option to parameterise the type of weld using an "Options list" variable has been added.
  • Post-installed anchors: an error in data retrieval where the characteristic strength of the concrete (fck) matched the maximum value permitted by the manufacturer has been fixed.
  • Anchor reinforcement: an error that prevented decimal values from being entered for the number of reinforcement bars has been fixed.
  • Anchor check: the documentation of the results has been improved in cases where it is not possible to calculate the resistance due to a negative value being obtained.
  • In connection sheets: a new option is displayed to label elements by their reference number only, in addition to the "description" and "description plus reference" options. Furthermore, a specific scene view for anchor bolts has been added.

CYPE 3D and CYPE Connect

  • Improvements to the "Trim section" operation: The range of section types supported by the operation has been expanded. In addition to the sections already supported, this feature now allows users to trim all formed sections and rectangular hollow sections.

CYPECAD, CYPE 3D and CYPE Connect

  • New series of timber cross-sections for Sweden have been added to CYPECAD, CYPE 3D and CYPE Connect.

StruBIM Shear Walls

  • The calculation of the design shear strength in shear walls subjected to tension in accordance with ACI 318-14 has been corrected.
  • The formula used for the shear check in accordance with ACI 318-25 has been corrected.

CYPECAD MEP incorporates generic VRF systems using R32 refrigerant, as well as Daikin’s VRV 5 range, including verification of the minimum room area based on the refrigerant charge.

CYPECAD MEP now includes the option to work with fan coils and user-defined luminaires. Until now, it was only possible to select models from specific manufacturers.

CYPELUX and CYPECAD MEP (under the "Lighting" tab) now allow you to import the physical dimensions of luminaires from EULUMDAT photometric files (.ldt), along with their luminous dimensions.

New options have been added that allow you to automatically generate HVAC installation drawings, such as the layout of ductwork with diffusers or the connection of components to water pipes.

The new mapping wizard allows users to define the characteristics of spaces imported from the BIM model. It enables the assignment of thermal loads, ventilation flow rates and properties for the automatic generation of elements.

The concept of "thermal load" is extended to "air-conditioning requirements", making it possible to define not only thermal loads and indoor temperatures, but also air renewal requirements by specifying the air supply and/or extraction flow rates.

As of version 2027.b, CYPEFIRE Hydraulic Systems will be known as CYPEFIRE Systems.

With this change, the app's interface has been reorganised into three tabs: "Project", which brings together the tools common to the other two tabs; "Fire extinguishing”, which contains the tools for the design and analysis of hydraulic fire-extinguishing systems (previously available in CYPEFIRE Hydraulic Systems); and "Fire detection and alarm systems", which incorporates the new tools for the design and verification of fire detection and alarm systems. Furthermore, the program allows both systems to be designed in the 3D model and the corresponding diagrams to be generated in the schematics section.

Version 2027.b of CYPEFIRE Systems incorporates new tools for the design and checking of fire detection and alarm systems.

These features expand the scope of the app, which until now had been focused on the design and analysis of hydraulic fire-extinguishing systems.

A new tool has been added to the "Extinguishing" tab, which allows users to lock existing installations or new areas where they do not wish to apply the hydraulic design process.

Version 2027.b allows users to create generic catalogues using the "Open BIM Database" option and save them for use on other projects. Furthermore, all the new elements added to the "Detection and alarms" tab are generic.

When importing a model, users can now select IFC files (.ifc) from CYPEFIRE Hydraulic Systems or CYPEFIRE Systems, which allows the program’s own elements to be generated automatically from the information contained in those files.

In the "Water Systems" and "Sanitary Systems" tabs, users can now create drinking water and sanitation networks from start to finish using the new complete installation generation option, via an editing window in the installation tree.

The "Digital Model" tab now includes the option to generate a 3D representation of each component. In addition, new components such as tanks, booster sets and pumps have been added.

As of version 2027.b, the modelling and analysis of gas installations have been integrated into CYPEPLUMBING within the new "Gas Systems" tab, thereby replacing the standalone CYPEGAS app and bringing it into line with the layout of the other tabs.

Version 2027.b incorporates the features of CYPELEC Distribution into a new CYPELEC tab. This integration enables the layout of electrical circuits and loads, as well as the analysis of low-voltage electrical systems, all within a single app.

CYPE PV Systems combines the management of generic and manufacturer catalogues into a single option, "Catalogues", simplifying access to them from within the program interface. This tool allows you to download manufacturers’ catalogues via the "Manufacturer" option, as well as edit generic catalogues via the "Generic" option.

In CYPETHERM, for "Energy simulation" projects, users can now enable the analysis of thermal loads and carry out the energy simulation using EnergyPlus within the same model.

Version 2027.b includes several improvements and enhancements to CYPEHVAC, CYPELUX and CYPEPLUMBING, including performance optimisations, usability improvements, new features and the resolution of issues reported by users. For more information, click on "Details":

Details

CYPEHVAC

  • Boiler manufacturer catalogues: Users can now select boilers from manufacturer catalogues, as well as from user libraries.
  • Integration of user libraries: User libraries are now managed as catalogues of generic project elements.

CYPELUX

  • Warning: Users are now alerted when a space requiring emergency lighting does not have emergency luminaires.
  • Improvements to reports: The generation of the "Calculation annex" report has been improved.
  • Importing luminaires when creating a project: Luminaires can now be included when creating a new project.
  • Native import of IFC models: When importing a model, you can select IFC files uploaded to the BIMserver.center project, which allows the program to automatically generate its own elements.

CYPEPLUMBING

  • Toolbar redesign: The toolbar has been reorganised to make it easier to access the program’s features.
  • Management of custom layers: Models with custom layers can be exported to the "Digital Model" and "Layout" tabs, making it easier to create plans and partial 3D visualisations of the installation.

Two new options have been added to the Arquimedes menu bar, allowing users to sign in and access the CYPE Mentor website from within the program interface.

Version 2027.b introduces a new way to access the Arquimedes interface customisation options via the "File > Preferences > Appearance" menu. From this section, you can switch between "Light mode" and "Dark mode", as well as change the typeface and font size of the text to improve readability.

A new option, "Search instance by Id", has been added to the "Entity-job item assignments" menu. This tool allows users to locate an item to be measured that has been excluded by the user and/or filtered out.

The categories of elements that can be converted into native Revit elements using the Open BIM – Revit plugin have been expanded.

The new categories are: electrical appliances, electrical equipment, lighting fittings, specialised equipment and fire alarm systems.

A new system for generating sprinkler pipe networks has been implemented, optimised for large-scale models with more than 15,000 pipe sections.

Version 2027.b includes enhancements and optimisations to the Open BIM – Revit plugin, including performance optimisations, usability improvements and the resolution of issues reported by users. For further information, click on "Details":

Details
  • Improvements to native element assignment: Streamlines converter mappings and allows families to be created simultaneously for elements awaiting assignment.
  • Improvements to utilities: Enhancements and optimisations have been made to the tools.
  • Improvements to native element conversion: Automatically closes Revit warnings and dialog boxes, and generates a .log file recording the time taken for each stage of the conversion process.
  • IFC export improvements: The plugin automatically configures the export settings and family mapping when uploading IFC models to BIMserver.center.
CYPE Mentor